ES Windows Custom & Geometric Windows Nationwide | TruePane Windows & Doors

ES Windows Custom & Geometric Windows in Greenacres: What to Know First

We install and service ES Windows custom and geometric windows in Greenacres as an independent ES Windows service provider, not a factory branch. Most custom shape work, arched units, and oversized openings run $1,800 to $6,400 depending on glass package, frame finish, and whether the opening needs structural reinforcement. We quote the job on paper before we order anything, and a live person answers at (754) 339-0784 when you call.

Call (754) 339-0784

This page is for Greenacres homeowners who already own ES Windows or are pricing a custom geometric project and want straight answers on cost, common failure points, and what a proper install actually involves. Dale Kessler founded TruePane Windows & Doors on the idea that out-of-true installs and voided warranties were problems worth fixing permanently, and that standard still governs every ES Windows job we take.

How ES Windows Products Fail - and How We Fix Them

ES Windows builds a solid frame, but in South Florida, the weak points show up at the intersections: glass-to-frame seals, corner joinery on geometric shapes, and weatherstripping on oversized units. Here is what we see most often in Greenacres:

• Corner seal separation on radius and arched units. The ES Windows EvoView and Vela series use bent-glass corners on arches and eyebrows. After five or six Greenacres summers, the butyl seal at the tightest part of the curve starts to pull away from the frame. You will see condensation inside the curve first, then mineral haze. We disassemble, clean the glazing channel, and re-bed with a marine-grade sealant that holds up to the humidity off Lake Worth Road. A factory replacement sash does not always fix the root issue if the frame slot was not prepped right the first time.
• Laminated glass delamination on impact-rated geometric windows. The ES Windows Impact Series uses a DuPont SentryGlas interlayer. On large trapezoid and triangle units, delamination starts at the sharpest corner, where the interlayer is thinnest. It looks like a milky edge spreading inward. The fix is a new lite cut to the exact template, not a field repair. We template every opening twice before ordering glass, which is why ours come back from the fabricator square and true.
• Roller and track wear on oversized sliders. ES Windows 7000 Series sliders over 8 feet wide ride on stainless rollers, but the frame track collects sand and grit from Greenacres landscaping. Homeowners notice the panel getting heavy, then binding. We replace rollers with hardened aftermarket bearings that outlast the OEM nylon wheels, and we re-shim the panel so the reveal stays even. The OEM rollers are fine; the track alignment is usually the real problem.
• Improper shimming around geometric frames. Dale Kessler grew up off Jog Road, and he has pulled more than a few arched ES Windows out of rough openings that were shimmed at the sill and header but left floating mid-jamb. The frame flexes, the operable vents stop sealing, and the homeowner blames the brand. We shim every 12 to 16 inches around the full perimeter and set the frame dead plumb before fastening. If it is not right in the opening, it will not be right in ten years.
• Failed weep system on radius bottoms. ES Windows factory weeps are small and clog fast with pollen and dust. On eyebrow and half-round units, water pools in the bottom track, migrates behind the glazing bead, and rots the interior trim. We drill supplemental weeps at the low points, flush the channels, and reseal the exterior with a polyurethane that flexes without cracking in the Palm Beach County sun.

Our ES Windows Custom & Geometric Windows Process

We run every ES Windows job the same way, whether it is a single half-round replacement or a full wall of custom trapezoids. The process keeps surprises off the bill and the job on schedule:

1. 1
   Call and scheduling. You call (754) 339-0784. A live person answers, we schedule the first visit, and we show up when we say we will.
2. 2
   Site measure and assessment. We measure every opening twice, check the rough framing for square and level, and look at how the existing window was set. This is where we find the shimming and flashing problems OEM replacement sashes will not fix.
3. 3
   Parts and glass decision. We lay out OEM ES Windows parts against quality aftermarket options on paper, with prices for both. For glass, we specify the interlayer, coatings, and gas fill based on the exposure and whether the unit needs to meet current Florida impact code.
4. 4
   Quote and ordering. You get a fixed line-item price before we order anything. No change orders for work we should have seen coming.
5. 5
   Install and adjustment. We set the new window or glass, shim and fasten, flash and seal, and then adjust every vent and lock until it operates without binding. On geometric shapes, the reveal should be even all the way around. We check it with a feeler gauge.
6. 6
   Cleanup, registration, and the promise. We haul off the old unit, register the manufacturer warranty layers in writing, and walk you through the Done Right Promise. If something is not right, we come back and make it right. No paperwork fight.

What ES Windows Custom & Geometric Windows Costs in Greenacres

Pricing depends on glass, shape complexity, and whether we are repairing or replacing. Here are honest ranges for what we see in Greenacres homes:

• Fixed half-round or eyebrow glass replacement: $900 to $2,200, depending on radius and glass package.
• Single arched or radius operable window, full replacement: $2,400 to $4,800 for impact-rated laminated glass.
• Oversized trapezoid or triangle fixed unit: $2,800 to $5,600, with structural reinforcement adding $400 to $900.
• Full geometric window wall (3 to 5 units): $9,000 to $18,000, templated as one elevation so sightlines and reveals match.
• Seal, weatherstripping, and hardware service on an existing ES Windows unit: $250 to $700, including the a free written repair estimate offer we run year-round.

What moves the price is glass type, gas fill, the condition of the rough opening, and whether the original install left us anything to correct. We quote flat so you know the number before the work starts. Call (754) 339-0784 for a free estimate on your specific opening.

Why Greenacres Homeowners Call TruePane Windows & Doors for ES Windows Work

We have been setting frames and hanging doors in Palm Beach County for going on two decades, and TruePane carries a 42-year community-service heritage through Dale Kessler and his father before him. We are not the cheapest bid, and we will not pretend to be. We are the company you call when the window is not right and has not been right since the last crew left. Our techs are background-checked and uniformed, they know ES Windows geometry, and they work in your home the way they would work in their own mother’s. If the project requires a brand pivot, we are authorized installers for PGT, CGI, CWS, and ECO Window Systems, so the quote compares manufacturer lines side by side on paper, not by glossy brochure. The Done Right Promise and The Keystone Standard back every job: both warranty layers registered in writing before the truck leaves your driveway. A square deal, in writing.

FAQs