Door Installation in Greenacres - Free In-Home Measure, Written Price

Trusted Door Installation for Greenacres Homeowners

A door that binds, sags, or lets daylight through the weatherstripping is more than an annoyance. In Greenacres, where summer humidity and afternoon storms push against every exterior opening, an out-of-true door is a water leak waiting to happen and an energy bill that never quite makes sense. Door installation in Greenacres typically runs $850 to $4,800 depending on the material, the opening, and whether the frame itself needs rebuilding. We complete most standard door installations in a single visit, and a live person answers when you call (754) 339-0784.

Call (754) 339-0784

TruePane Windows & Doors has served Greenacres and the surrounding communities since 2008 through the craft tradition started by Dale Kessler. We install doors the way a second-generation glazier measures an opening: twice, slowly, and without cutting corners. Every door installation carries the Done Right Promise and The Keystone Standard, which means both manufacturer warranty layers are registered in writing before our truck leaves your driveway.

What Our Door Installation Service Includes

We install, replace, and service every residential door type found in Greenacres homes, from the single-entry door on a 1970s ranch house to fully custom pivot doors on newer construction near River Bridge. Each installation starts with the same step: we measure the rough opening, check the framing for square and level, and quote the job on paper before any work begins. Here is what we do under each door category.

Entry & Swing Doors

Entry doors take more weather and more use than any other door in the house, and a Greenacres entry door has to handle both. We install fiberglass, steel, and wood entry and swing doors sized to the existing rough opening, with new hinges, threshold, weatherstripping, and lockset prep. When a door slab is too far gone but the jamb is still sound, we can replace just the slab. When the jamb shows rot from years of Florida rain blowing against it, we rebuild the opening properly before the new door goes in, so the job is done right down to the framing.

Double & French Doors

Double doors fail at the meeting stile first. That is where the two panels come together, and if the reveal is off by even an eighth of an inch, the doors will fight each other every time you close them. We install double and French doors with equal reveals, consistent gaps, and astragals that actually seal. For Greenacres homes with an interior French door between a living room and a patio, we also verify the header can carry the load, because the original builder did not always build it that way.

Bifold & Folding Doors

Bifold and multi-panel folding doors open an entire wall to the backyard, which is a real asset in Greenacres during the eight months a year you want the pool visible from the couch. We install aluminum and clad-wood bifold and folding door systems from manufacturers we trust, and we handle the track, the rollers, the hinge hardware, and the threshold pan. Folding doors live or die by their alignment; if the panels are not plumb and the track is not dead level, the doors will bind on day one. We set them so they glide.

Pivot Doors

Pivot doors are heavy, single-panel entry doors that turn on a top and bottom pivot instead of side hinges. They are common on contemporary Greenacres builds and on renovations where the homeowner wants a wider, cleaner opening. We install pivot hardware rated for the exact weight and height of the panel, and we reinforce the header and floor connection before the door hangs. A pivot door that is not engineered correctly will droop and scrape the floor. We do not let that happen on our trucks.

Storm Doors

A storm door is the working layer in front of your main entry door, and in Greenacres it earns its keep during the rainy season. We install full-view, ventilating, and retractable-screen storm doors with closers adjusted to the wind conditions on your street. The most common mistake we see is a storm door mounted out of square to save time, which leaves a gap at the latch side and lets the bugs in. We square the frame to the house before the door is hung.

Arched & Custom Doors

Arched and custom doors are where the years of craft experience matters most. These openings are never a standard size, and the template has to be cut on site, by hand, from the actual opening, not from a drawing. We build and install arched and custom doors for arched entries, oversized sliders, and one-off designs that standard catalogs will not cover. The founding rule at TruePane is simple: if the pane is not true, the job is not done. That rule applies to the door itself, the frame, and the reveal all the way around.

Brands We Service for Door Installation

We are an authorized installer for more than a dozen manufacturer lines, and the brands you are most likely to see on a Greenacres quote are Pella, Marvin, and Milgard. We have installed Pella entry and patio door systems on homes from Greenacres to Palm Beach, and we know their hinge, threshold, and weatherstripping details well enough to order the right part the first time. Marvin clad-wood doors show up often on higher-end Greenacres homes, and our installers are trained on Marvin’s installation requirements so the warranty stays intact. Milgard’s vinyl and fiberglass lines are a working homeowner’s door, and we set them to the same standard we use on every job.

We also install Jeld-Wen doors regularly, particularly their steel and fiberglass entry lines. Whatever make you have, the important thing is that the door is installed square, in a solid frame, with the manufacturer’s flashing and sealing details followed. That is the only way the warranty means anything. If you are not sure which brand fits your opening, we will quote manufacturer lines side by side on paper so you can see exactly what you are buying.

Signs You Need Door Installation Right Now

• The door scrapes or sticks in summer. In Greenacres humidity, wood door slabs swell and fiberglass frames shift. A door that binds in July and swings free in January is telling you the opening has moved or the slab has absorbed moisture. The longer it rubs, the more damage it does to the jamb and the hinge screws.
• You can see daylight around the door. Step outside at night, turn on the interior light, and close the door. If light shows around any edge, weather, water, and insects are getting through the same gap. That gap is also where your air conditioning is leaking out every afternoon.
• The threshold is soft or rusted through. A door threshold that flexes under your foot or shows rust lines across the top has been failing for a while. Water that pools on a Greenacres threshold during a summer storm will rot the subfloor under it. We rebuild the threshold and the subfloor before we set the new door.
• The door will not latch without lifting the handle. This is a striker-alignment problem, but the cause is usually deeper: the door has sagged because a hinge screw stripped out or the frame has shifted. Forcing the latch every day wears the mechanism and eventually leaves the door unlocked at night.
• The frame shows rot or termite damage. In Greenacres, older homes with wood door bucks will eventually see rot at the bottom corners, especially on the south and east exposures. Termites find the same entry. If you can press a screwdriver into the frame, the structural wood is gone and the door is only as secure as the paint holding it together.

Our Door Installation Process - Step by Step

Every TruePane door installation follows the same disciplined sequence. There are no shortcuts, and there is no step we skip because the homeowner is not watching. Here is how it works.

Step 1: Free On-Site Estimate and Measurement

You call (754) 339-0784 and a live person answers. We schedule a time when you are home, and our technician arrives in uniform with a digital laser measure, a 4-foot level, and a moisture meter. We measure the rough opening at three heights, check the header and king studs for sag, and read the moisture content of the existing frame. The quote you get is a line-item price with both warranty layers stated in writing.

Step 2: Manufacturer Order and Warranty Registration

Once you approve the quote, we order the door from the manufacturer with the exact size, swing, finish, and hardware you selected. Before the order is finalized, we register both manufacturer warranty layers in writing and give you the durations and terms on paper. The Keystone Standard means you know exactly what is covered and for how long before we ever swing a hammer.

Step 3: Removal and Opening Inspection

On installation day, we protect the interior floor with drop cloths and remove the old door and frame without cutting corners that should have been kept. With the opening exposed, we inspect the rough framing, the subfloor, and the existing flashing. If we find rot, termite damage, or a header that was never built to carry the load, we stop and show you what we found, with a photo and a fixed price to repair it. No surprises on the bill, and no hiding problems behind the new trim.

Step 4: Installation, Leveling, and Sealing

We install the new door with shims at the hinge points and the latch point, never through the middle of the jamb. The frame is set plumb in both directions and the reveals are checked with a tapered gauge to be equal top to bottom. We flash the head and the jambs per the manufacturer’s detail, seal the threshold with a continuous bead, and set the hardware so the latch closes with one finger.

Step 5: Cleanup, Walkthrough, and the Done Right Promise

We haul away the old door and the packaging, vacuum the work area, and walk the finished door with you. You see the reveals, you feel the latch, and you have both warranty registrations in hand. If anything is not right, we fix it before we leave. And if something shows up in the next 90 days, the Done Right Promise means we come back and make it right, no paperwork fights and no arguing.

How Much Does Door Installation Cost in Greenacres?

Door Installation Near Greenacres - Our Service Area

We install doors throughout central Palm Beach County, from our home base serving Greenacres and the surrounding communities. You will see our trucks in Door Installation in Palm Springs, where the 1970s and 80s vintage homes often need full frame rebuilds, and down in Door Installation in Atlantis, where the gated communities keep their exterior door standards high. We also serve Lake Worth Beach, Westgate, Lantana, South Palm Beach, Manalapan, Palm Beach, Royal Palm Beach, Boynton Beach, and West Palm Beach. Greenacres residents can usually get an estimate scheduled within the week, and the installation is typically done in a single visit.

Frequently Asked Questions - Door Installation in Greenacres

Schedule Your Door Installation Service in Greenacres Today

A door that is not square, not sealed, and not secure is a problem that gets more expensive every Greenacres storm season. TruePane Windows & Doors has served Greenacres since 2008 with honest pricing, written warranty registrations, and a 90-day promise that means something. Call (754) 339-0784 to schedule your free door installation estimate. A live person answers, and you will get a line-item quote with no obligation.

Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Greenacres since 2008.