Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterECO Window Systems Custom & Geometric Windows in Greenacres: What to Know First
We provide independent ECO Window Systems custom and geometric window repair and replacement in Greenacres, with most jobs completed in a single visit once parts are in hand. A typical shaped-window reglaze or seal replacement runs $340 to $1,200 depending on size and glass package, and full custom replacement units start around $900 per opening. We are not affiliated with ECO Window Systems, but we have been setting and servicing their shaped units in Palm Beach County for years. If you own an arched, radius, or oversized ECO window that is fogged, binding, or leaking, call (754) 339-0784 and a live person will answer.
How ECO Window Systems Products Fail - and How We Fix Them
ECO Window Systems builds a solid aluminum frame, but the shaped and oversized units have failure patterns we see repeatedly in Greenacres homes. Here is what actually goes wrong and what we do about it:
- Radius and arch units losing their seal at the spring point. The ECO 4500 Series arched windows have a known weak point where the curved glass meets the straight leg at the bottom corners. In Greenacres humidity, the desiccant inside that corner gets overwhelmed and you get fogging that starts as a crescent and spreads. We pull the sash, replace the insulated glass unit with a new one built to the exact radius, and reset the glazing bead so the seal is not fighting the frame. If the sash is not true to the opening, we shim and reset before the new glass goes in.
- Sill rot on geometric picture windows in stucco walls. Any fixed geometric window in a stucco home is only as good as the flashing behind it. The ECO 3500 picture windows we see in Greenacres neighborhoods like Nautica Isles and River Bridge often have weep holes clogged with stucco overspray from the original build, which traps water against the sill. By the time the owner notices, the bottom track is corroded. We remove the window, replace corroded sill components, drill clean weeps, and reflash the opening properly before reinstalling. That is a repair, not a band-aid.
- Trapezoid and triangle windows with failed balances on operable vents. ECO makes trapezoid awning and hopper units where the vent section is a smaller shape inside the larger fixed frame. The balances on those vents fail faster than the glass because they are undersized for the geometry, and the vent starts to drop shut on its own. We replace the balance hardware with a higher-capacity aftermarket part that fits the ECO track, then adjust the vent so it holds position at full open. The part does not cost much; knowing to use the next capacity up is the difference.
- Curved transoms with glass-to-frame sealant failure. The ECO curved transom units over entry doors in Greenacres take direct afternoon sun on west-facing elevations. That constant thermal cycling breaks the sealant bond between the curved glass and the aluminum frame, and water wicks in along the top edge. We remove the old sealant, clean the channel with solvent, and re-bond using a structural silicone rated for high UV exposure. We do not just smear caulk over the old bead. The joint has to be clean to hold.
- Oversized sliding glass door panels with worn rollers causing frame drag. ECO Window Systems also builds large sliding door panels, and the ones we see in Greenacres track homes from the 1990s and 2000s have steel rollers that rust in the humidity. The panel starts dragging, then the frame twists slightly, and eventually the glass binds. We replace the rollers with stainless aftermarket carriers, realign the panel, and adjust the interlock so it slides like it should. If the track itself is scored, we replace the track insert while the panel is out.
Our ECO Window Systems Custom & Geometric Windows Process
Here is how a typical ECO shaped-window job goes when you call us in Greenacres:
- 1
You call (754) 339-0784. A live person answers, day or night. We ask the right questions: what shape the window is, what it is doing (fog, leak, bind), and when you first noticed it.
- 2
We measure and diagnose on site. A background-checked, uniformed technician comes out, measures every opening twice, and checks the rough opening, not just the visible frame. If the opening is out of square, we find out before we order parts.
- 3
We quote on paper, side by side. You see the OEM ECO part price next to a quality aftermarket option. We tell you which we would use and why. No surprise line items.
- 4
We do the work in one visit. Most ECO shaped-window repairs are completed the same day the replacement glass or hardware arrives. We do not leave a second appointment hanging.
- 5
We test and register. Before the truck leaves, we verify the window opens, closes, seals, and drains. Then we register both warranty layers in writing under The Keystone Standard. If something is not right, the Done Right Promise applies and we make it right with no paperwork fights.
What ECO Window Systems Custom & Geometric Windows Costs in Greenacres
Custom and geometric window work is priced by the opening, the glass package, and the frame condition. Here are the ranges we quote in Greenacres:
- Shaped window reglaze (arched, radius, trapezoid): $340 to $750 per unit, depending on size and glass type.
- Full custom replacement of a geometric window (impact-rated): $900 to $2,400 per opening, including installation and flashing.
- Balance or roller hardware replacement on an operable ECO vent: $180 to $380 per unit.
- Sealant re-bond on a curved transom: $250 to $500, depending on access and length.
What moves the price is glass: laminated impact glass costs more than annealed, and low-E coatings add $90 to $180 per unit. A window on a second floor with poor ladder access adds a mobilization charge. The estimate is free, and the price we quote is the price you pay. Call (754) 339-0784 to schedule a free estimate.
Why Greenacres Homeowners Call TruePane Windows & Doors for ECO Window Systems Work
We are not the cheapest bid in Greenacres, and we do not try to be. The homeowners who call us have usually lived in their house for twenty years and plan to stay for twenty more. They want the work done right the first time by a company that will still answer the phone if something goes wrong. Dale Kessler grew up off Jog Road in Greenacres, and he has been setting frames in Palm Beach County for going on two decades. We stand behind every ECO job with the Done Right Promise, and we register both warranty layers before the truck leaves the driveway. If you have PGT, CGI, CWS, or ES Windows elsewhere on the property, our techs service those lines too, which means one call covers the whole house.
FAQs
Yes. We template the existing opening or the existing sash, send the exact radius and leg dimensions to our glass fabricator, and the replacement unit is cut to match the original geometry. If the frame is still sound, we reuse it and replace the glass only. If the frame is twisted or corroded, we quote a full custom replacement built to the opening.
As an independent ECO Window Systems service provider, we do not control ECO’s warranty terms. What we do is give you the choice of OEM ECO parts or quality aftermarket equivalents, and we tell you in writing which is which. If the OEM warranty is still active and matters to you, we use OEM. If the warranty lapsed years ago, an aftermarket insulated glass unit often performs better for less money. Call (754) 339-0784 and we will look at your specific window.
For most hardware failures, yes. Balance replacements, roller swaps, and sealant re-bonds are done in one visit. Custom shaped glass is built to order, so the glass itself takes three to ten business days depending on the fabricator’s schedule. We schedule the install the moment the unit arrives.
If the frame is straight, the opening is square, and the problem is glass or hardware, repair is usually the right call and costs a fraction of replacement. If the frame is corroded, the rough opening has water damage, or the window is more than 25 years old and losing its finish, replacement makes better long-term sense. We will tell you honestly which path we would take on our own house.
Yes. For impact-rated replacements, we pull permits and handle the inspection. As Dale puts it: if it is not right in the opening, it will not be right in ten years. Permits are how that gets verified by someone other than us, and we want that third set of eyes on our work.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Greenacres and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.