Mr-Glass Custom & Geometric Windows Nationwide | TruePane Windows & Doors

Mr-Glass Custom & Geometric Windows in Greenacres: What to Know First

We provide independent Mr-Glass custom and geometric window repair, parts sourcing, and replacement in Greenacres. Most Mr-Glass custom window jobs are completed within three to five business days once parts are confirmed, and we quote everything on paper before any work begins. We’re not affiliated with Mr-Glass, but we’ve worked on enough of their shaped and oversized units in Palm Beach County to know exactly what fails and what holds up. If you own a Mr-Glass window in Greenacres, this page covers what you need to know. Call (754) 339-0784 for a free estimate.

Call (754) 339-0784

How Mr-Glass Products Fail - and How We Fix Them

Mr-Glass built custom shaped windows for Florida builders through the 1990s and early 2000s, and a lot of those units are still in Greenacres homes today. Here’s what we see most often on the custom and geometric side:

• Fogging in shaped and radius units. Mr-Glass curved and eyebrow windows used a flexible spacer system that was state of the practice for its time, but the sealant bond around compound-radius bends breaks down faster than a straight-edge seal. In Greenacres, where we get afternoon storms off the Everglades followed by hard sun, that thermal cycling pressure finishes the job. The fix is either a full reglaze of the shaped unit or a replacement fabricated to the original radius. Most seal failures in radius Mr-Glass windows are not repairable in place. We tell you that honestly before we order anything.
• Sagging sash corners on oversized geometric units. Mr-Glass made some very large trapezoid and parallelogram windows for lakefront and garden-facing living rooms. Those wide unsupported corners rely on a corner key and adhesive system that can degrade with heat and weight. We see the lower corner drop by a quarter inch or more in older Greenacres installations. Our fix is a corner re-key with new polymer gusseting, or a full sash rebuild if the frame has twisted. The first visit tells us which.
• Failed glazing tape on direct-glazed geometric windows. Many Mr-Glass custom shapes were direct-glazed into the rough opening rather than set in a sash. The glazing tape they used had a service life of roughly 15 to 20 years in Florida sun. Once it lets go, water gets in, the unit starts moving, and you get a drafty window that binds. We strip the old tape, reset the glass on fresh structural glazing tape, and check the rough opening for dry rot. That’s a repair we’ve done in Greenacres more times than we can count.
• Patio slider rollers on Mr-Glass custom wall openings. If your Mr-Glass installation included a large geometric fixed panel beside an operating slider, pay attention to the roller assembly on the sliding panel. Mr-Glass sourced these from a third-party supplier, and the rollers were not built for daily use over two decades. When a Greenacres customer tells us the slider starts dragging in July, the rollers are almost always flat-spotted. We replace them with a comparable aftermarket roller that matches the track profile. If the track is gouged, we can repair it without pulling the whole frame.
• IGU gas loss in arched transoms. The arch over your front door may be losing its insulating gas. You’ll notice it as a slight haze or a room that gets hotter in the afternoon than it used to. Mr-Glass used argon fills standard, and argon escapes over time through micro-seal failures. On a gas-filled Mr-Glass arch, we test the unit and give you a straight number for replacement versus reglazing. In Greenacres, the answer is usually replacement with a modern low-E unit matched to the original arch profile.

Our Mr-Glass Custom & Geometric Windows Process

We keep this simple and you’ll know where things stand at every step:

1. 1
   Call and talk to a person. You call (754) 339-0784 and reach a live human being. We ask what the window is doing, take your address, and set a time to look at it. No callback forms.
2. 2
   We measure and diagnose. A background-checked, uniformed technician comes out and measures the opening twice. We read the rough opening before we touch any tape measure, the way it should be done. We’ll tell you what’s wrong with the Mr-Glass unit and whether we’re repairing or replacing it.
3. 3
   Parts decision on paper. If it’s a repair, we source OEM Mr-Glass parts when they’re still available. When they’re not, we show you the aftermarket option we recommend and explain why it matches. You see the prices side by side before you commit.
4. 4
   The repair or replacement. Most Mr-Glass custom window repairs happen in a single visit. If it’s a replacement, we schedule it once the fabricated unit is ready. We show up when we say we will.
5. 5
   We test what we touched. We operate the window, check the seal, check for square, and walk you through what we did. Dale Kessler’s rule applies to every Mr-Glass job we take: if the pane is not true, the job is not done.
6. 6
   Warranty paperwork in your hand. Both manufacturer warranty layers are registered in writing before the truck leaves your driveway. You’re covered for 90 days on our workmanship. No arguing, no fine print that covers neither.

What Mr-Glass Custom & Geometric Windows Costs in Greenacres

Every project is quoted on paper, but here are honest ranges for the Mr-Glass work we see in Greenacres:

• Re-glaze a small fixed Mr-Glass circle or hex window: $180 to $320 per unit, depending on glass type and access.
• Replace the IGU in a Mr-Glass radius or eyebrow window: $450 to $850, with custom-bent glass adding to the high end.
• Corner re-key and sash rebuild on an oversized geometric Mr-Glass window: $250 to $600 per sash, depending on size and whether the frame needs truing.
• Full replacement of a large Mr-Glass shaped window (trapezoid, parallelogram, oversized arch): $1,200 to $3,500, fabricated to match the original profile.
• Patio slider roller replacement for a Mr-Glass custom wall opening: $150 to $400 per panel, depending on track condition.

What moves the price: whether the unit can be serviced in place or needs to come out, glass type and low-E coating, and whether the rough opening has water damage from a failed seal. We don’t pad the bill. Written line-item quotes mean no surprises. Call (754) 339-0784 to schedule a free estimate and get an exact number for your Mr-Glass window.

Why Greenacres Homeowners Call TruePane Windows & Doors for Mr-Glass Work

We’ve been setting windows and hanging doors in Palm Beach County for going on two decades, and the work we’re best known for is impact-rated installations that pass inspection the first time. That reputation carries over to every Mr-Glass custom window we touch. We’re an independent Mr-Glass service provider, which means we’re not selling you a brand line, we’re fixing your window and being honest about the best way to do it. We carry relationships with more than a dozen manufacturer lines, including PGT, CGI, CWS, and ES Windows, so when a Mr-Glass unit is beyond saving, we can show you replacement options side by side on paper. Your work is covered by the Done Right Promise. If it’s not done right, we make it right. A live person answers the phone 24 hours a day, seven days a week. That’s a promise Dale Kessler made when he started this company, and it holds today.

FAQs