Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Picture & Fixed Windows in Greenacres, FL | TruePane Windows & Doors
Picture and fixed windows are the non-operable workhorses of Florida home design. They don’t open, and that’s exactly the point. A fixed window gives you the largest possible sheet of laminated impact glass with no moving parts to fail, no tracks to corrode, and no seals to wear out. In Greenacres, where we live with hurricane season as a fact of life, homeowners choose these windows for wide lake views, high foyers, and great rooms where airflow comes from other units. TruePane Windows & Doors supplies and installs fixed impact windows from PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass, and we’ve been setting them in Greenacres homes long enough to know what our local wind zone demands. Call (754) 339-0784 to talk through a project.
Product Overview - Picture & Fixed Windows
A picture window is a fixed glass panel engineered to stay in the opening when a storm hits. There’s no sash to rattle, no operator hardware to strip, no weatherstripping that gets brittle under the Greenacres sun. What you get instead is a thick laminated impact glass unit held in a reinforced frame, built to take the wind load for your specific zone. The payoff is the view: because there’s no horizontal meeting rail or crank mechanism, a fixed window gives you the cleanest sightline of any window type we install.
Architecturally, these windows anchor the room. We see them most often as a wide center panel in a living room, with operable single hung or casement windows flanking it so the homeowner still gets cross-breeze. They’re also popular as transom bands, stairwell accent windows, and bathroom privacy glass when the opening is high enough. In short: non-operable laminated impact glass panels for maximum unobstructed views, often paired with operable units on either side. For Florida construction, fixed impact windows are also the most structurally predictable option: fewer moving parts means fewer failure points, which matters when a TAS-tested system has to perform as a unit.
Technical Specifications
- Frame materials: Aluminum or vinyl. Aluminum is the common choice in Greenacres for wide spans and darker finishes; vinyl suits homeowners who want a thermally broken frame with lower heat transfer.
- Maximum size: Up to 120 inches wide, depending on the configuration, design pressure, and the specific product line. Wider is possible in some lines as a mulled assembly, but that changes the engineering and the approval paperwork.
- Glass options: Laminated impact glass with a PVB interlayer, low-E insulated glass, tinted glass, or clear glass. We’ll walk you through your realistic options based on what the product approval already lists.
- Finish colors: White, almond, bronze, black, and tan. Stock availability varies by manufacturer and frame material.
- Operation: Fixed, non-operable. No screen, no track, no sash hardware.
- Compliance: Miami-Dade NOA and Florida Product Approval numbers available per configuration, matched to FBC High-Velocity Hurricane Zone requirements.
The number that matters most for a fixed window is design pressure. Every Greenacres home sits in a specific wind zone, and the unit we quote you has to carry a DP rating that matches it. We’ll confirm that on paper before you ever sign.
Hurricane & Compliance Performance
Laminated Impact Glass
The core of every fixed impact window we install in Greenacres is laminated glass: two panes bonded with a PVB (polyvinyl butyral) interlayer. Under impact, the glass may crack, but the interlayer holds the shattered pieces in the frame. That’s the entire point of the product, and it’s why these units are rated for HVHZ use at all.
Miami-Dade NOA / Florida Product Approval
Each configuration carries a Miami-Dade NOA (Notice of Acceptance) or a Florida Product Approval number. These documents are issued per exact configuration: frame, glass, size, and anchorage. When we quote your windows, we verify the approval against what we’re actually installing, because that’s what the Greenacres building department reviews.
FBC / HVHZ Compliance
This product is engineered to Florida Building Code High-Velocity Hurricane Zone requirements. That’s the strictest wind-load and impact standard in the state, the one Greenacres enforces. A window that meets HVHZ is not just “impact glass” in name; it’s a system designed and tested as a complete assembly.
TAS 201 / TAS 202 / TAS 203 Testing Context
HVHZ-rated windows earn their approvals through the TAS protocol family. TAS 201 covers large-missile impact, TAS 202 cyclic wind-pressure loading, and TAS 203 forced-entry resistance. The fixed window configurations we install carry approvals tied to this testing, not to a generic marketing label.
Design Pressure for Your Wind Zone
Design pressures are matched to your wind zone, up to +/-100, never higher. What that means in practice: we don’t oversell a heavier, more expensive window than your home requires, and we don’t under-spec one either. We calculate the DP your opening actually needs in Greenacres and quote to that number.
Energy Performance
Low-E and insulated glass options are available for fixed windows, which matters when a wall of west-facing glass is looking down the barrel of a Florida afternoon. Low-E coatings reduce solar heat gain without tinting the view, and insulated units help keep the interior surface from radiating heat into the room.
Color & Glass Options
Finish choices for Greenacres homes tend to fall along two lines. The classic Florida Mediterranean and ranch styles lean toward white or almond frames that disappear against stucco. The more contemporary builds, and a lot of renovated mid-century homes around Greenacres, go with bronze or black frames for a crisp line against light walls. Tan is a quieter alternative for homes with beige or travertine trim. All five colors, white, almond, bronze, black, and tan, are available depending on the frame material and line you select.
Glass selection is driven by what the opening faces. Clear laminated impact glass gives you the truest view and handles the impact requirement on its own. Low-E insulated glass is the right call for large fixed panels facing south or west, where solar gain drives cooling costs. Tinted glass cuts glare and adds privacy during daylight hours, which Greenacres homeowners like for fixed bathroom or stairwell windows. We’ll show you samples and explain what each option does to the light in your room before you commit.
Installation by TruePane Windows & Doors in Greenacres
A window that carries a Miami-Dade NOA is only as good as the hole it’s installed in. We’ve been called out to Greenacres homes to look at failing windows where the glass was fine and the problem was how the frame was set. In an HVHZ wind event, the load travels through the glass into the frame, then through the anchors into the structure. If any link in that chain is sloppy, the approval doesn’t mean much.
Our installation crew follows AAMA 2400/2410 practice on every fixed window we set. We start with a pre-install inspection of the rough opening: condition of the jambs, the sill, the header, and how the existing flashing was done. Then the window goes in level, plumb, and square, not “close enough.” On a 120-inch-wide picture window, half a degree out of square is a visible problem and a structural one at the corners. Once the frame is anchored to the manufacturer’s spec, we run an AAMA 812 low-expansion foam perimeter sealant as the air and water barrier, then integrate it with the home’s existing WRB. Every window gets a water test before we consider the job done, and we leave the opening cleaner than we found it.
Greenacres-specific factors matter here. Most of the city sits in a wind zone that puts real design pressure on wide glass, and some neighborhoods border lakefront or canal exposure that adds to the load and corrosion from water proximity. Permitting in our area means the town reviews the product approval against the opening. We know what Greenacres is going to ask for, and we prepare the submittal so your permit doesn’t stall.
Frequently Asked Questions - Picture & Fixed Windows
This product is engineered to Florida Building Code HVHZ requirements, with design pressures matched to your specific wind zone in Greenacres, up to +/-100 and never higher. We confirm the exact DP for your opening before you order. Call (754) 339-0784 and we’ll check your address and rough opening size.
Lead times vary by manufacturer and the line you choose. PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass all run on different production schedules, and custom finishes or unusual sizes can add weeks. We’ll give you a realistic window at the quote stage, based on what’s actually in production at that moment. Call (754) 339-0784 for current lead times.
Yes. Greenacres building officials require the product approval documentation for the exact configuration being installed, and we prepare that submittal as part of the job. It’s one of the reasons we quote the specific window, not just a product line. The approval number has to match the size, glass, and frame you’re actually buying.
Within the limits of the manufacturer’s approval. A fixed window can be built up to 120 inches wide in many lines, but custom sizes have to fall within the tested configurations on file. If you want something unusually tall or a mulled combination with operable units, we’ll specify it together and confirm the approval covers it. Call (754) 339-0784 to walk through your dimensions.
Fixed windows are the lowest-maintenance option we sell. The frame needs an occasional wash with mild soap and water, and the perimeter sealant should be visually checked once a year, especially after a named storm passes through Greenacres. There’s no track to lubricate and no moving hardware. If the sealant bead ever looks cracked or pulled away, call us before water gets behind it.
Get a Quote - Picture & Fixed Windows in Greenacres
If you’re planning a window project in Greenacres, we’ll bring samples, measure your openings, and walk you through the real options for your home’s wind zone and exposure. The estimate is free, the quote is line-item, and you’ll know exactly what you’re buying. Call (754) 339-0784 to schedule an on-site measurement and get your project started.
Written by the team at TruePane Windows & Doors, serving Greenacres, FL with hurricane-impact window and door installation.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
Detailed Images



Before
After
Before
After
Before
After