Awning Windows

Awning Windows in Greenacres, FL | TruePane Windows & Doors

Awning windows are the top-hinged, crank-out workhorses of Florida architecture. They open outward from the bottom, shedding afternoon rain while still letting the humid air move through your home in Greenacres. TruePane Windows & Doors installs impact-rated awning windows with laminated glass across our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines. We’re a local Greenacres team that’s measured, ordered, and installed this exact profile in dozens of homes across Palm Beach County, and we know which configurations hold up to the wind zones this area sees every hurricane season. Call (754) 339-0784 to talk through your project.

Call (754) 339-0784

Product Overview - Awning Windows

An awning window hinges at the top and cranks out at the bottom, which gives it a shape that works harder than most people realize. The open sash acts like a small canopy, so you can leave it cracked open during a passing Florida rainstorm without water pouring onto the sill or into the room. That’s the reason so many Greenacres homeowners put them over kitchen sinks, in bathrooms, and along the upper sections of living-room walls where breeze matters but water intrusion is a constant concern.

For hurricane-prone construction, the profile has a real advantage: the sash presses inward against the frame when wind hits it. A window that’s physically being pushed shut by the storm is one that’s harder to force open, and combined with laminated impact glass, the assembly is engineered for the Florida Building Code’s High-Velocity Hurricane Zone standards. The frames come in aluminum or vinyl, both with multi-point weatherstripping and corrosion-resistant hardware that holds up to the salt-and-humidity mix we deal with in this part of Palm Beach County. TruePane Windows & Doors has installed this product in Greenacres homes from the older ranch-style neighborhoods off Jog Road to newer builds near Okeeheelee Park, and the crank mechanism is one of the things we rarely see fail when it’s installed square and sealed correctly.

Technical Specifications

Here’s what the Awning Windows impact series gives you, spec by spec, in our own words:

• Frame materials: Aluminum or vinyl. Aluminum runs narrower and stronger for larger openings; vinyl costs less and insulates better on smaller sizes.
• Glass options: Laminated impact glass with a PVB interlayer, Low-E insulated glass, tinted glass, or clear glass. Mix and match depending on sun exposure and code requirements.
• Finish options: White, almond, bronze, black, or tan. All five are stocked colors for the majority of configurations we order.
• Screen options: Fixed screen or retractable screen. Retractable screens cost more but disappear when you don’t need them.
• Operation: Manual crank-out with a folding handle. The hardware is zinc-plated or stainless depending on the line.
• Design pressure: Matched to your specific wind zone, up to +/-100. Never more, never less than the opening requires.
• Compliance: Miami-Dade NOA and Florida Product Approval numbers available per configuration. Engineered to FBC HVHZ requirements.

Every opening in Greenacres gets spec’d individually. A second-story window over a sink doesn’t carry the same design pressure as a first-floor window facing east toward the coast. We size accordingly.

Hurricane & Compliance Performance

Laminated Impact Glass - Two panes of glass bonded to a PVB (polyvinyl butyral) interlayer. If an impact occurs, the glass fractures but stays adhered to the interlayer, keeping the opening sealed and the weather outside. This is the core of the impact product on every awning window we sell in Greenacres.

Miami-Dade NOA / Florida Product Approval - Each size and configuration carries a Notice of Acceptance from Miami-Dade County and a Florida Product Approval number. These are issued per configuration, so your specific quote will list the exact approvals for what we’re installing. We pull those documents during permitting.

FBC / HVHZ Compliance - The assemblies are engineered to the Florida Building Code’s High-Velocity Hurricane Zone requirements. That’s the stricter tier of Florida code, the one that applies in Palm Beach County, and it governs frame strength, anchoring, and impact resistance.

TAS 201 / TAS 202 / TAS 203 Testing Context - HVHZ-rated products are tested under the TAS protocol family. TAS 201 covers large-missile impact, TAS 202 covers cyclic wind-pressure loading, and TAS 203 covers forced-entry resistance. When a product claims HVHZ compliance, this is the test battery it went through.

Design Pressure for Your Wind Zone - Design pressure is matched to your wind zone, up to +/-100, never higher than what the opening actually requires. Greenacres sits in a wind zone that varies by exposure category, and we verify that with the city before ordering.

Energy Performance - Low-E coatings and insulated glass assemblies are available for this product. For Greenacres homes with west-facing rooms or sun-baked walls, we often specify Low-E to cut solar heat gain while keeping the impact rating intact.

Color & Glass Options

Florida architecture in Greenacres runs the gamut from 1970s concrete-block ranch homes to modern coastal builds, and the five finish options cover that range. White and almond blend quietly into most older homes and rental properties. Bronze and black read more contemporary and pair well with darker trim or modern farmhouse styling. Tan splits the difference on Spanish-influenced or Mediterranean exteriors where stark white can look wrong against stucco.

Glass choices depend on what the room actually needs. Clear laminated impact glass is the most economical way to meet code and keeps sightlines natural. Tinted glass handles glare in rooms facing direct sun without relying on window treatments. Low-E insulated glass adds a thermal barrier, which matters in Greenacres where the air conditioning runs from March through November. We’ve installed enough of these in Palm Beach County to tell you honestly which glass you’ll feel the difference with, and which you won’t.

Installation by TruePane Windows & Doors in Greenacres

An awning window has a lot riding on the install. The sill has to be level, the jambs plumb, and the whole assembly square in the rough opening before we even think about fasteners. If it’s tweaked or wedged, the crank mechanism binds and the weatherstripping gaps. If the perimeter isn’t sealed right, water finds its way into the wall cavity and the NOA-rated system means nothing.

Here’s how our Greenacres installs go. We start with a pre-install inspection of the opening: checking the rough framing, the existing flashing, and any water damage that’s already in the wall. We set the frame level, plumb, and square using shims at the anchor points, then fasten per the manufacturer’s approved anchoring schedule for the specific substrate. We run a low-expansion foam perimeter sealant following AAMA 812 practice, then apply the exterior sealant bead at the flange. The install method follows AAMA 2400/2410 practice for field installation of windows. We finish with a water test on the sill and a full demonstration of the crank operation before cleanup.

In Greenacres, we also flag permitting at the start. Most replacement windows in Palm Beach County trigger a permit, and HVHZ jurisdictions want to see product approvals before they sign off. TruePane Windows & Doors pulls the paperwork, attaches the NOA and Florida Product Approval docs for your exact configurations, and keeps the project moving through inspection. Improper installation compromises the NOA-rated system, which is exactly why this product is not a handyman job.

Frequently Asked Questions - Awning Windows

What wind zone or design pressure is the Awning Windows impact series rated for? Design pressure is matched to the specific wind zone for your Greenacres location, up to +/-100, never higher than the opening requires. We confirm the exact rating for each opening during the site measurement and include it on your quote.

What is the lead time for awning windows? Most configurations ship from the manufacturer in 4 to 8 weeks depending on the line, glass package, and finish. TruePane Windows & Doors confirms current production schedules when we issue your quote so you’re not surprised by a delay. Call (754) 339-0784 and we’ll check current lead times for the size you need.

Does my permit in Greenacres require a Miami-Dade NOA or Florida Product Approval submittal? Yes, in nearly all cases. Palm Beach County and the City of Greenacres enforce HVHZ building codes, and the permit application needs the product approval documents for your specific configurations. We handle that submittal as part of the project.

Can I customize the size or configuration? Awning windows are ordered to the opening, not picked off a shelf. Width and height are custom per rough opening, and you choose the frame material, finish, glass package, and screen type. Some lines limit width for structural reasons, so we’ll tell you if what you want exceeds what the product can do.

How do I maintain the frame and crank mechanism? Wipe the frame and sash with mild soap and water twice a year, and lubricate the crank gears with a light silicone spray. Check the weep holes at the bottom of the sill after heavy rain to make sure they’re clear. Greenacres gets enough dust and pollen that those small openings clog, which leads to standing water in the track.

Get a Quote - Awning Windows in Greenacres

If you’re pricing awning windows for one opening or a whole house in Greenacres, TruePane Windows & Doors will measure, spec, and quote the right configurations for your home. Free on-site measurement, written line-item quote, and no pressure to decide on the spot. Call (754) 339-0784 to schedule yours.

Written by the team at TruePane Windows & Doors, serving Greenacres, FL with hurricane-impact window and door installation.