Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Golf
Door installation in Golf, FL means working on high-value custom homes where the wrong glass or hardware choice costs real money within a few years. We arrive at Golf jobs knowing the village has no building department of its own, so every permit runs through Palm Beach County and every opening must meet Florida Product Approval standards for the wind-borne debris region. That’s the baseline, not an upsell. If you’re looking at a fairway-facing rear door or an east-facing entry that catches morning ocean air, call (754) 339-0784 and we’ll walk you through what actually holds up here.
Our crews serve Golf directly from the South FL metro office, and we schedule work around your availability, not ours. Dale Kessler founded TruePane in 2008 on a rule that still governs every install: if the opening is not true, the job is not done. That applies to a $900 storm door and a $30,000 pivot entry alike.
Why TruePane Windows & Doors Is Golf’s Preferred Door Installation Company
Golf is not a volume market. Roughly 250 residents live in this village, and nearly every home is a custom build backing onto fairways or tucked along Golf Road. That means the homeowners we work with are not shopping three bids and picking the lowest. They want a company that knows the difference between a standard hinge and a stainless hinge when salt air is eating the hardware two blocks from the course.
Our technicians are background-checked and uniformed. They quote manufacturer lines side by side on paper before you commit a dollar. We register both warranty layers in writing under The Keystone Standard, and every job carries the Done Right Promise. If something is not right, we make it right. No paperwork fights.
We also answer the phone. A live person, 24 hours a day, seven days a week. No voicemail tree, no call center in another state. For Golf homeowners who remember when a contractor actually picked up the phone, that matters.
Our Door Installation Services in Golf
Impact-Rated Entry & Swing Doors
An entry door in Golf is not just a door. It’s the first line against wind-driven rain, salt-laden air, and the occasional errant golf ball if your lot fronts the course. We install impact-rated entry and swing doors from PGT, CGI, and other Florida-certified manufacturers, with full-frame replacement on older homes so the jamb and threshold get the same upgrade as the panel. A 1960s custom home off Golf Road with the original aluminum frame door is not going to get compliant by swapping the slab. The frame has to come out, the rough opening gets inspected, and the new assembly gets sealed with marine-grade flashing.
Double & French Doors
Double and French doors are common on rear elevations facing fairways and patios in Golf. Laminated impact glass here is not optional on course-facing lots. A single-pane tempered panel will shatter when a Titleist comes over the fence at speed. Laminated impact glass absorbs the strike, holds the inner layer, and keeps the envelope sealed. We specify stainless steel hinges and hot-dip galvanized fasteners on every exterior French door in Golf. Galvanized hardware from a box store will rust through the jamb in five to seven years in this air.
Bifold & Folding Doors
Bifold and folding door systems let homeowners open an entire wall to the pool or garden, and Golf has no shortage of either. The challenge on these installations is not the panel weight; it’s the track system and drainage. Salt air pits and flakes powder-coated aluminum bottom rails faster here than inland Palm Beach County. We spec tracks with sealed stainless bearings, drill weep holes to county code, and bed the sill on a sloped membrane so water sheets away even in a late-afternoon downpour.
Pivot Doors
A custom pivot door makes sense on a custom fairway-facing entry, and Golf has the architectural scale for them. These doors weigh hundreds of pounds and hang on a top and bottom pivot hinge rather than side jamb hinges. The hardware has to be oversized, rated for the door weight, and stainless or marine-grade. We lay out the pivot point, confirm the header is structurally adequate, and set the bottom pivot on a bearing plate that will not corrode or sink. Done wrong, a pivot door binds within the first season. Done right, it swings with two fingers for a decade.
Our full Door Installation team handles arched and custom openings too, including full-frame retrofits on older Golf homes where the rough opening has settled out of square. Measuring twice is the cheap part. Fixing the rough opening before the door goes in is the part that separates a five-year door from a twenty-year door.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Golf
We are an authorized installer for more than a dozen manufacturer lines, and for Golf specifically we most often quote PGT on exterior doors where impact rating and salt-air durability carry the load. Pella also comes up on interior French doors and high-traffic pantry entries. We keep common parts for these lines on our service trucks, so a hinge replacement or weatherstripping repair on a Marvin or Jeld-Wen door in Golf usually happens the same visit, not after a two-week parts order. You’ll see line-item pricing for each manufacturer side by side before you choose. No surprises on the bill, no second appointment left hanging.
Common Door Installation Problems We See in Golf Homes
- Seized rollers and rusted jamb screws on aging sliders. Salt air works its way into the lower track, the rollers corrode, and the door starts dragging. We’ve pulled sliders off 1980s homes near Golf Road where the jamb screws literally snapped during extraction.
- Powder-coated aluminum frames pitting and flaking along the bottom rail. This is the signature failure mode of Golf’s coastal air. Once the coating fails, the corner joints lose their seal, and the insulated glass fogs. A full-frame replacement with marine-grade coating ends the cycle.
- Sagging doors from galvanized steel hinge failure. East-facing entries take the morning ocean breeze almost daily. Galvanized hinges corrode, the door drops, and the latch no longer lines up. We replace with stainless or composite hinges and re-align the slab.
- Shattered non-impact glass on fairway-facing rear doors. This one is uniquely Golf. A single-pane garden door on a lot backing to the course is a ticking clock. We’ve replaced more than a few after a stray golf ball found the glass before we got there for the estimate.
Pricing for Door Installation in Golf, FL
Here’s what we see in Golf’s current market. A standard entry door replacement with a pre-hung impact-rated steel or fiberglass slab runs $2,800 to $5,500 installed, depending on the frame condition and hardware grade. A French door with laminated impact glass runs $6,000 to $12,000 for a quality Florida-certified unit with stainless hardware. Pivot doors on custom fairway entries start around $15,000 and climb with the panel size, glass package, and finish. Bifold systems are the widest range: $10,000 to $30,000. The coastal-spec hardware we specify adds roughly 15 to 20 percent to material cost over inland hardware, and it’s the cheapest money you’ll spend on the job. The inland-spec version fails inside a decade in Golf’s air. Call (754) 339-0784 for a written line-item quote. Estimates are free, and the price we quote is the price you’ll pay.
Everything we quote for Door Installation in Golf is done to Palm Beach County code, with permits pulled and inspections passed. No shortcuts on the paperwork, because the county checks.
We Also Serve Cities Near Golf
Our crews serve Golf and the surrounding communities of Greenacres, Palm Springs, Atlantis, and Lake Worth Beach. If you’re near the village line or own a property in one of those areas, the same coastal-spec standards apply. Call (754) 339-0784 and tell us which course or neighborhood you’re in; we’ll know the road.
Serving Golf, FL - Our Local Coverage Area
We’re based in the Golf area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs — Door Installation in Golf
All door installations in Golf require Palm Beach County permits because the village has no independent building department. The county reviews the product approval, inspects the rough opening and final install, and verifies Florida Product Approval compliance for the wind-borne debris region. We pull the permit, schedule the inspection, and keep the paperwork on file for you. Call (754) 339-0784 if you want to know what a permit for your specific door will cost.
Yes, and for two separate reasons. First, Golf sits in Florida’s wind-borne debris region, and the Florida Building Code requires impact-rated or protected openings. Shutters can satisfy that for storms, but they do nothing for the golf balls that hit your rear door on a normal Tuesday. Laminated impact glass in a fairway-facing door stays intact when a ball strikes it, while standard single-pane glass shatters. Shutters protect against hurricanes; laminated glass protects against the course.
We specify stainless steel hinges, hot-dip galvanized fasteners, and marine-grade weatherstripping on every exterior door in Golf. Powder-coated aluminum frames get an upgraded coating spec on the bottom rail where salt and irrigation water collect. The hardware costs more upfront, but galvanized hardware from a big-box store will rust through a jamb in five to seven years in this air. Call (754) 339-0784 if you’d like a written rundown of the hardware we quote for your specific opening.
Yes, a fogged insulated glass unit in a door can be replaced without changing the whole door, as long as the frame is still square and the hardware is sound. We remove the glazing stops, measure the sealed unit exactly, order the replacement, and set it with the correct adhesive and gasket. If the frame itself is pitted, flaking, or sagging, a full-frame replacement usually costs less over a decade than repeatedly patching a corroding frame. Call (754) 339-0784 and we’ll tell you which path fits your door.
Golf sits roughly 5 to 8 miles from the Atlantic, and the salt-laden air cuts the lifespan of standard door hardware roughly in half compared to inland communities like western Greenacres or Wellington. Galvanized hinges that last 15 years inland fail in seven to ten here. Powder coat that holds up 20 years inland starts pitting along the bottom rail within five to seven. We build every Golf quote around that reality and specify coastal-grade materials from day one. Call (754) 339-0784 for a free estimate on your door.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Golf with coastal-grade door installation done to county code since day one.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.