Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterAndersen Window Replacement: The Greenacres Owner’s Guide
Andersen window replacement in Greenacres typically runs $340 to $1,200 per window installed, depending on the sash, hardware, or full-frame work required. We stock common Andersen-compatible sashes, balances, weatherstripping, and lock sets on the truck, so most single-window jobs are done in one visit. Most Greenacres homeowners figure out something’s wrong the same way: a sash that won’t stay up, a crank that grinds, or condensation between the panes that never clears. That fog is the seal telling you it’s done. The glass still looks fine, but the insulating gas is gone, and in South Florida humidity, that fog becomes permanent in a season or two.
Which Andersen Models This Applies To
Andersen has built dozens of product lines over the years, and they don’t all take the same parts. The ones we work on most often here in Greenacres are the 200 Series, 400 Series, A-Series, and the older Narroline windows that went into so many Palm Beach County homes in the 1980s and 1990s. The 400 Series Tilt-Wash has a completely different balance system than the Narroline, and we’ve seen homeowners buy the wrong sash online more times than we can count. If you can find it, check the corner of the glass or the edge of the frame for a small laser-etched or printed label. Andersen serial numbers usually start with a two-digit year followed by a plant code. If the label is gone, we can still identify the series from the frame profile, the glass thickness, and the hardware type. One thing to know about Andersen parts in Florida specifically: the coastal and high-humidity climate wears out weatherstripping about twice as fast as it does in a dry climate. That stripping is cheap, but it is the most replaced component we see on Andersen windows in Greenacres.
We’re an independent service provider, not attached to Andersen corporate. We buy OEM Andersen parts for anything involving glass, balances, or exterior cladding, because aftermarket versions rarely match the exact profile and wind-load rating. For interior hardware like cranks and latches, quality aftermarket equivalents do the job at a lower price, and we’ll tell you the difference in writing before you decide.
Signs Your Andersen Window Replacement Is Failing
- Fog or condensation between the panes. This means the insulating glass seal has failed. The argon or krypton gas has leaked out, and humid Florida air has taken its place. No amount of wiping fixes this; the sash or the glass unit needs replacement.
- A sash that drops when you let go. On a double-hung Andersen, that’s a failed balance. A 400 Series uses a cartridge balance that slides into the jamb; a Narroline uses a block-and-tackle with a spiral rod. Both wear out, and there’s no safe adjustment that brings a broken balance back.
- A crank that turns but doesn’t move the sash. The gear inside the operator is stripped, or the arm has separated. Andersen operators are replaceable, and it’s a one-trip fix if we know the model and the window’s rough opening dimensions.
- Drafts or heat you can feel at the closed window. This is weatherstripping gone hard and compressed from a decade of Florida sun. It’s an inexpensive fix, but when ignored, it rots the energy savings out of the whole window.
- Visible rot at the bottom corners of the frame. On wood-clad Andersen units in Greenacres, afternoon thunderstorms and irrigation overspray are the enemy. Once moisture sits at the sill corner, the rot spreads inward. The sooner it’s caught, the more likely we can replace the sash and salvage the frame.
Replacement Cost & What’s Included
Here’s what Andersen window replacement work costs in Greenacres, based on what we’ve priced over the past several seasons.
| Service | Typical Price Range |
|---|---|
| Weatherstripping replacement, one window | $95 - $210 |
| Balance replacement, one double-hung sash | $180 - $320 |
| Insulated glass unit or sash replacement, one window | $340 - $700 |
| Full frame replacement, including new Andersen window | $800 - $1,200+ |
What drives the range is the series, the glass package, and whether we’re replacing a component or the whole window. Every quote includes the part, the labor, the disposal, and both warranty layers registered in writing before we leave the driveway. No change orders, no surprise line items, no fine print that covers neither. If the job’s not right in the opening, it won’t be right in ten years. That’s Dale Kessler’s rule, and it stands.
DIY or Call Us?
Replacing Andersen weatherstripping or a loose latch is a Saturday-morning job most homeowners can handle with patience. Yanking out a failed balance cartridge is where DIY goes wrong. Those cartridges are under enough tension to hurt you if they release the wrong way, and forcing the wrong part into the jamb can warp the window permanently. If the issue is anything glass-related, don’t touch it. The sash is heavier than it looks, and the seal unit isn’t something you can reseal at home.
Our honest advice: if the fix involves a screwdriver and the part is exposed, give it a go. If it involves a balance, a clamp, or glass, call us at (754) 339-0784. We’ll tell you on the phone whether it’s worth a visit, and we won’t schedule one if it’s not.
FAQs
Andersen windows in South Florida typically last 25 to 40 years, but the components each have their own lifespan. Weatherstripping lasts 5 to 8 years, balances 10 to 15 years, and the insulated glass carries a 20-year pro-rated warranty on most Andersen lines. The frame can last much longer if the water gets redirected away from the sill. Call (754) 339-0784 and we’ll inspect what you have and tell you exactly what’s failing and what it needs.
Yes, in most cases the failed component can be replaced without pulling the whole window. A failed balance, a stripped crank, or hardened weatherstripping is a parts-level repair. Only when the frame itself is rotted or warped do you need a full replacement. We’ll talk it through with you and quote the repair and the replacement side by side on paper so you decide knowing both numbers. Call (754) 339-0784 for a free in-home assessment.
A sash or balance replacement takes about an hour per window once we’re there. A full-frame Andersen replacement typically takes half a day per window, including trim and cleanup. Most parts-level jobs in Greenacres are completed the same day we arrive because we keep the common Andersen parts on the truck. Call (754) 339-0784 and we’ll tell you what to expect for your specific model.
We keep the most common Andersen balances, weatherstripping, crank operators, and lock sets in the truck for 200 Series, 400 Series, and Narroline windows. Special glass packages and less common series like the A-Series sometimes need to be ordered from Andersen, which adds a week or so. We also work on parts for Pella, PGT, so if you have a mixed house, we can usually handle it in one visit. Call (754) 339-0784 and tell us what model you have; we’ll check the truck before we come out.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Greenacres and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.