Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterECO Window Systems Custom Windows & Doors in Greenacres: What to Know First
ECO Window Systems custom windows and doors in Greenacres are specialty products, and when they need work, you need a shop that has actually taken them apart. We are an independent ECO Window Systems service provider, which means we work on your existing units without being tied to a factory script. Most custom ECO jobs in Greenacres run one to three days once parts are in hand, and we quote line by line so you know what everything costs before we touch a frame.
This page is written for homeowners in Greenacres who own ECO Window Systems products and want straight answers about repairing or replacing custom shapes, oversized panels, storefront glazing, curtain walls, and architectural grille work. If that sounds like your situation, call (754) 339-0784 and a live person answers. Every time.
How ECO Window Systems Products Fail - and How We Fix Them
ECO Window Systems builds a solid product, but Greenacres has a way of finding every weak point in a window or door. Here is what we see on custom jobs, and what we do about it.
- Architectural grilles and SDLs detaching from insulated glass on ECO custom shapes. On radius and eyebrow windows, the interior grille bar is a separate profile that clips to the spacer. Humidity cycles in Greenacres work those clips loose over time, and the grille sags or falls clean off inside the unit. Because the glass itself is usually fine, we re-secure the grille to the spacer with an OEM-matching clip or a factory-spec adhesive that holds up to Florida condensate. You do not replace the sash for a sagging grille bar.
- Roller corrosion on ECO sliding and patio door custom configurations. Big custom sliders, especially multi-panel stacking units that carry wide glass pockets, ride on steel rollers that corrode in salt-humid air within six or seven years. The first sign is a door that rolls hard in one spot, then drags every summer. We replace the roller assemblies with marine-grade or stainless carriers, pitch the track so water sheds the way it should, and the door rolls like it did the year it was hung.
- Curtain wall and storefront gasket compression failures. ECO curtain wall and commercial storefront systems rely on continuous gaskets to keep water out of the glazing pocket. After a decade of UV exposure, those gaskets stiffen and shrink, which is why you get weeping at mullions and along the sill in the afternoon storms. We pull the old gasket, replace it with a durometer- and profile-matched EPDM, and re-set the glass pressure plate. On Greenacres commercial storefronts, that is usually the difference between a dry lobby and a damp one in August.
- Oversized ECO fixed glass units losing argon and fogging. ECO custom oversized glass panels, especially the wide fixed units over transoms and picture windows, sometimes lose their gas fill at the secondary seal. The tell-tale pattern on a failed ECO lite is a fog line that starts at one corner and creeps inward over a few seasons. We measure the opening twice, order the replacement lite with the exact same glass makeup and spacer, and re-glaze the pocket clean. A warranty-safe replacement keeps the frame warranty intact.
- Custom shape windows settling out of square in the opening. On Greenacres homes built in the 1990s and early 2000s, we see ECO radius and pentagon windows that were set on uncorrected framing. The rough opening was never square, so the sash binds at one corner and the operator arm bends over time. We pull the unit, shim the frame true in the opening, re-bed it, and dress the trim so the window closes like it should. If the pane is not true, the job is not done. That rule lives on the whiteboard in our shop, and it applies double to custom shapes.
Our ECO Window Systems Custom Windows & Doors Process
We have repaired and replaced enough ECO product in Greenacres to know that custom work does not follow a template. Here is how the job goes from first call to final walkthrough.
- 1
You call (754) 339-0784. A live person answers, day or night. We listen to what the window or door is doing and schedule a visit on a date we will actually keep.
- 2
We inspect the unit in place. A background-checked tech comes out, measures every opening twice, and pulls trim only if needed to see what the frame is doing. On ECO custom shapes we check the rough opening, not just the sash.
- 3
We put the options on paper. OEM part, quality aftermarket, or full replacement. We write every line item down, with the ECO model line named, so you see exactly what you are paying for and what the warranty covers.
- 4
We do the work. No surprise change orders. No second appointment left hanging. On custom glazing and storefront work, we schedule the labor so your opening is closed the same day we open it up.
- 5
We test every function. The sash cycles, the door rolls, the gasket seals, and the glass is set square in the opening. If it is not right in the opening, it will not be right in ten years.
- 6
We register both warranty layers. Manufacturer warranty and workmanship warranty, in writing, before our truck leaves your driveway. That is the Keystone Standard, and it applies to every ECO job we touch.
What ECO Window Systems Custom Windows & Doors Costs in Greenacres
Here are the ranges we quote most often in Greenacres for ECO custom windows and doors. Every number below is a line-item quote, not a guess, and we never pad the bill with surprise fees.
- ECO custom shape window glass replacement (radius or eyebrow): $420 to $980 per lite, depending on size and glass makeup. Grille repair without glass replacement runs $140 to $310.
- ECO sliding door roller and track rebuild: $280 to $620. Multi-panel custom sliders go higher, $700 to $1,400, because the carriers are heavier and the panels weigh more.
- Curtain wall or storefront gasket replacement: $540 to $1,800 per elevation, based on linear footage and whether we re-glaze as part of the job.
- Full ECO custom window replacement: $1,100 to $4,200 per opening for shaped or oversized units, installed, with both warranty layers registered in writing.
The main cost drivers are glass complexity, frame condition, and whether the opening itself is out of square. Custom shapes cost more to fabricate and more to set. Call (754) 339-0784 for a free written estimate. We will give you the number before we start, and that is the number on the bill.
Why Greenacres Homeowners Call TruePane Windows & Doors for ECO Window Systems Work
Dale Kessler grew up off Jog Road in Greenacres, and he spent enough humid summers here to understand exactly why the right window seal is not optional. TruePane has been serving Palm Beach County since 2008 on the strength of a simple rule: if the pane is not true, the job is not done. We have done ECO custom work in enough Greenacres homes to know the weak points before we open the sash.
Every ECO job we take on carries the Done Right Promise. If it is not done right, we make it right, no paperwork and no arguing. Our techs are background-checked and uniformed, and they treat your home the way they would treat their own mother’s house. If we cannot get an ECO part in reasonable time, we know the Andersen, Pella, and PGT lines well enough to offer you a real alternative and quote it side by side on paper.
We are the company that plans to be in Greenacres in thirty years. That changes how we do the work today.
FAQs
No, not if the repair is done correctly. We use OEM or factory-spec parts where required, and we document the work so the original frame and glass warranty stays intact. Call (754) 339-0784 and we will tell you exactly what your warranty covers before we touch the unit.
Yes. ECO custom shapes and SDL grilles require specific profiles and clips, and we keep the common failure parts in stock. For oddball lites and oversized panels, we order directly and verify lead time before we schedule. In Greenacres, most parts land in three to seven business days.
Repair when the frame is square, the glass is sound, and the failure is mechanical: rollers, gaskets, grilles, operators. Replace when the frame itself has rot or the glass package is blown on a unit that is already fifteen years old. We will show you both numbers and let you decide. Estimates are free at (754) 339-0784.
Most custom glass replacements are ordered within one business day and installed within one to two weeks, depending on the lite size and glass makeup. We will give you a firm install date when we quote the job, and we will be there when we say.
Yes. We handle ECO storefront, curtain wall, and commercial glazing work throughout Greenacres. We re-glaze, re-gasket, and re-set framing on occupied buildings, and we schedule so your opening is never unsecured overnight.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Greenacres and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.