Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Roof Repair in Greenacres: What to Know First
CGI roof repair in Greenacres isn’t a sideline for us - it’s work we do regularly on homes throughout the area, from original 1990s installations to newer impact-rated systems. Most CGI roof jobs take one visit and run between $300 and $1,800 depending on what’s failed, and we tell you the price before any work starts. If you own a CGI product that’s leaking, lifting, or letting daylight through where it shouldn’t, call (754) 339-0784 and we’ll send a tech who actually knows this brand’s failure points. This page covers what goes wrong with CGI roofs in our climate, what repair actually costs, and how we approach the work differently than a general contractor would.
How CGI Products Fail - and How We Fix Them
- CGI Estate Series skylight seals breaking down. The Estate line uses a compression gasket around the glass that hardens in South Florida sun. In Greenacres, where summer UV sits over 10 on the index for months, we see these gaskets crack and shrink at the corners first. Water gets behind the frame and follows the curb. We replace the gasket with a marine-grade material rated for higher heat than the original, re-bed the curb, and test with a hose before we leave.
- CGI Sentinel Series roof window operators binding. The operator arms on Sentinel units collect grit and salt air in our area, then bind mid-stroke. Owners assume the window’s failing. Most times the operator just needs disassembly, cleaning, and re-lubrication with a dry silicone that won’t attract more grit. We carry those parts on the truck.
- CGI flat-roof curb flashing lifting at the corners. This is the most common leak source we find on CGI roof installations in Greenacres, and it’s usually not the CGI product at all - it’s the flashing someone else installed around it. Wind-driven rain from summer storms gets under lifted corners. We pull the old flashing, install new with proper overlap and sealant, and make sure the curb drains away from the opening.
- CGI impact-rated roof glass developing seal failure. CGI’s laminated glass is tough, but the insulated units can still lose their inert gas fill over 15 to 20 years. The symptom is fog between the panes that comes and goes with temperature. That’s a glass replacement, not a roof repair, but we do the full job - remove, match the tint and thickness, set the new unit, and register the work so the CGI warranty stays intact where it applies.
- CGI roof hatch hardware corroding. Homes near the lake in Greenacres deal with higher humidity than homes further west. We’ve pulled CGI roof hatch hinges that were dead from corrosion while the hatch itself was fine. Homeowners ask if the whole hatch needs replacing. It doesn’t. We replace the hinge, treat the hardware, and the hatch works like new for a fraction of the cost.
Our CGI Roof Repair Process
Here’s how a typical CGI roof repair runs with us, from first call to cleanup:
- 1
You call, a person answers. That’s not marketing copy. We have a live person on the phone 24 hours a day. You describe what you’re seeing, and we ask the right questions to figure out if this is a roof repair, a glass replacement, or something else.
- 2
We schedule the visit. Our techs are background-checked and uniformed. They arrive when we say they’ll arrive. No four-hour windows.
- 3
Diagnostics first, always. The tech inspects the roof penetration, the CGI unit, the flashing, and the surrounding curb. We find the actual cause before we touch a tool. That’s the only way the fix holds.
- 4
Parts decision, in writing. We show you the OEM part cost and a quality aftermarket alternative if one exists, side by side. You decide. We explain which choice keeps your CGI warranty valid and which doesn’t, in plain language.
- 5
The repair and the test. We do the work, then test it. Hose test for leaks. Cycle test for operators. Seal check for glass. We don’t leave until we’d be comfortable with the work on our own roof.
- 6
Paperwork and the promise. We document what we did, register warranty layers where applicable, and leave you with the Done Right Promise in writing. If something’s not right, we make it right. No arguing, no fine print that covers neither side.
What CGI Roof Repair Costs in Greenacres
Here’s honest pricing for the CGI roof work we see most in this area:
- Flashing repair or replacement around a CGI curb: $300-$700 depending on access and how much old material needs to come out.
- Skylight gasket replacement on a CGI Estate Series unit: $400-$600 per unit, including cleaning and re-bedding the frame.
- Operator repair or replacement on a Sentinel roof window: $250-$450. Most jobs are repair, not replacement.
- Roof hatch hardware replacement: $200-$400, including corrosion treatment on surrounding metal.
- Full insulated glass replacement in a CGI roof unit: $800-$1,800 depending on size, tint, and whether impact-rated glass is required for code compliance.
What moves the price: roof pitch, access (single story versus two story), whether power tools can reach the curb safely, and the cost of the specific glass or part. We give you a written, line-item quote before any work begins - no surprise charges on the bill. Call (754) 339-0784 for a free estimate, and we’ll come out and put real numbers on paper for your specific CGI product.
Why Greenacres Homeowners Call TruePane Windows & Doors for CGI Work
We’ve been doing this work in Palm Beach County since 2008, and Dale Kessler founded TruePane in 2008 because he kept seeing the same thing: impact-rated products, including CGI, installed or repaired incorrectly, then warranties voided by shoddy workmanship. So we built a company around doing it right and standing behind it in writing. Our techs know CGI’s product lines because we’ve taken them apart, repaired the failures, and put them back together - hundreds of times. We also service PGT, CWS, ES Windows, and ECO Window Systems, which matters when we need to match trim or hardware across brands on the same roof. Every job carries the Done Right Promise and The Keystone Standard: both warranty layers registered in writing, durations stated, before the truck leaves your driveway. A live person answers our phone 24/7. No voicemail trees, no call center, no “we’ll get back to you.” You call. We answer.
FAQs
Not if the repair is done correctly with compatible materials and the work is documented. The warranty void we see in Greenacres comes from improper flashing, wrong sealant, or aftermarket parts that don’t match the original spec. As an independent CGI service provider, we don’t claim CGI approval on warranty decisions - but we do our work to the standard that preserves your coverage, and we document everything in writing so you have a record if you ever need it.
In most cases you can replace just the insulated glass unit. CGI roof products are designed with replaceable glazing, and matching the tint, thickness, and impact rating is the key to a seamless fit. We source glass that matches original CGI specifications, and if the frame is still sound, you don’t pay for a whole new unit. Call (754) 339-0784 and we’ll tell you which one your situation calls for.
Fast enough to keep the damage from spreading. A live person answers our phone 24 hours a day, and we’ll get a tech to your home as soon as possible for a leaking roof penetration. Water intrusion waits for no one in South Florida, and neither do we.
It depends on what’s failed. A gasket or flashing repair on a 15-year-old Estate Series unit costs a few hundred dollars and can buy you another decade. If the glass itself has fogged or the frame is corroded through, replacement starts making more sense. We’ll tell you the truth either way, with numbers on paper. That’s how we work. Call (754) 339-0784 for an honest assessment and a free estimate.
Most of the repair work we do - flashing, gaskets, operators, hardware - doesn’t require a permit under Greenacres code. When work does require one, we pull it and handle the inspection. We don’t ask you to navigate the city’s building department. We’ve been working in Greenacres long enough to know exactly what the inspectors expect, and we do the work so it passes the first time. Not after a callback.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Greenacres and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.