Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterES Windows Shingle, Tile & Metal Roofing in Greenacres: What to Know First
We repair and replace ES Windows shingle, tile, and metal roofing systems throughout Greenacres as an independent ES Windows service provider. Most repair jobs are diagnosed and completed in a single visit, and we carry the sealants, flashing, and fasteners that match ES Windows factory specifications. Pricing runs honest: you pay for the work, not a franchise marketing budget. If you own a home in Greenacres with ES Windows roofing components and something is leaking, lifting, or no longer sealing, call (754) 339-0784 and we’ll walk through what you’re seeing before anyone schedules a truck.
How ES Windows Products Fail - and How We Fix Them
- Flashing separation on ES Windows tile roof transitions. On ES Windows tile roof systems, the metal flashing where roof planes meet walls or skylights is often the first thing to let go. In Greenacres the daily heat expansion followed by evening cooling works the flashing loose over a few years, and then a hard afternoon downpour drives water under the tile. We remove the old flashing, inspect the underlayment beneath, replace what’s compromised, and set new flashing that’s mechanically fastened and sealed to the ES Windows trim profile.
- Fastener backout on metal roof panels. ES Windows metal roofing panels use a specific fastening pattern, and when a fastener loses its gasket or backs out, you get a slow leak that shows up as a brown stain on the underside of the decking long before it drips on the floor. We replace the failed fasteners with upgraded gasketed options and reseat any panel that’s shifted. We check the whole run, not just the one that’s visible, because once one lets go the rest are usually close behind.
- Valley seal failure on shingle-style ES Windows roof sections. Roof valleys are the most common failure point on any shingle roof, and ES Windows shingle roof sections are no exception. In Greenacres the valley seal takes a beating from leaf debris and standing water during the wet season. The symptom is almost always a leak in the room directly under the valley line. We cut out the old sealant, clean the metal valley, inspect for rust or pitting, and re-seal with a product rated for South Florida temperature swings.
- Trim and edge details pulling away from the fascia. ES Windows roof edge trim is part of what gives the system its clean look, but in a humid climate like ours, the combination of moisture and sun breaks down the bonding points over time. When the edge trim pulls free it opens a path for wind-driven rain. We refasten the trim and reseal the edge, and we check behind it for hidden rot in the fascia board before we close things back up.
- Boot failure at roof penetrations on ES Windows roofs. Every roof penetration, whether it’s a plumbing vent, an exhaust fan, or a solar mount, needs a flexible boot to stay watertight. On ES Windows roofs in Greenacres, the original boots tend to dry out and crack within eight to twelve years due to UV exposure. The crack is often invisible from the ground, but a roof inspection will find it every time. We replace the boot with a heavier-duty version and seal the base to the ES Windows roofing surface.
Our ES Windows Shingle, Tile & Metal Roofing Process
- 1
The call. You reach a live person at (754) 339-0784, day or night. We ask what you’re seeing, where the leak is showing inside the house if there is one, and what type of ES Windows roof you have.
- 2
The inspection. A uniformed technician comes out and starts with the spot you’re worried about, then walks the whole roof line. We take photos of everything we find, and we show you what we’re seeing before we ever ask you to approve work.
- 3
The parts decision. For ES Windows roofs, we match the existing profile and material. Where OEM parts are available and make sense, we use them. Where aftermarket parts are genuinely better, like upgraded gasketed fasteners or heavier-duty boots, we tell you why and quote both options on paper.
- 4
The repair. We do the work in one visit when the scope allows. No second appointment left hanging because someone forgot a tool or a part. We measure twice, set the fastening pattern correctly, and seal with products rated for our humidity and sun.
- 5
The test. After the repair we water-test the area where practical and walk the surrounding roof to make sure we didn’t miss anything adjacent.
- 6
The paper. You get a written description of what was done, what was used, and what’s covered by our Done Right Promise. If it’s not right, we come back and make it right, with no arguing.
What ES Windows Shingle, Tile & Metal Roofing Costs in Greenacres
Most ES Windows roofing repairs in Greenacres fall between $250 and $900 depending on what we find when we get on the roof.
- Boot replacement at a single penetration: $180 to $350
- Valley seal repair: $300 to $650
- Flashing replacement at a wall or skylight transition: $400 to $900
- Fastener replacement along a metal panel run: $250 to $600
- Roof inspection with no repair needed: maintenance check rate
What moves the price is access, the condition of the underlayment once we open things up, and whether the damaged area has been leaking long enough to rot the decking. We quote line by line before we start, and the number you approve is the number you pay. Call (754) 339-0784 for a free estimate.
Why Greenacres Homeowners Call TruePane Windows & Doors for ES Windows Work
Dale Kessler grew up off Jog Road in Greenacres, and he’s been setting frames, hanging doors, and working roof transitions in Palm Beach County for going on two decades. We’re a windows and doors company first, which means we understand how the roof ties into the building envelope in a way a roofing-only crew often misses. When an ES Windows skylight or roof-adjacent window is part of the problem, we can address the whole opening in one visit. We also carry service experience across PGT, CGI, CWS, and ECO Window Systems, so if your home has mixed manufacturer lines, we’re not going to tell you to call someone else. Every job is covered by our Done Right Promise, and a live person answers our phone 24 hours a day, 7 days a week. That’s not a scripted line. That’s how we’ve run the business since Dale founded it in 2008.
FAQs
No. As an independent ES Windows service provider, our repairs are designed to preserve the original warranty. We use materials and methods that match the ES Windows installation specifications, and we document everything in writing so you have a paper trail if a warranty claim ever comes up. We’d never do a repair that quietly voids coverage and leaves you holding the bag.
In most cases, yes. ES Windows tile and metal profiles are still in production, and we match the original color, texture, and fastener pattern rather than slapping on whatever’s on the truck. If you have an older ES Windows line that’s been discontinued, we’ll quote the closest current profile and show you a physical sample before any work is approved.
Most single-point repairs, like a boot or a valley seal, are done in two to four hours once we’re on the roof. Flashing replacement at a wall or skylight can run half a day depending on the underlayment condition underneath. We schedule every job with the understanding that you’d rather have it done right than done fast, but we also don’t waste your time. Call (754) 339-0784 and we’ll give you an honest time window for your specific issue.
If the damage is localized, meaning one valley, one boot, or one section of flashing, repair is almost always the right move economically. If the underlayment is failing in multiple areas or the fasteners have backed out across the entire roof, replacement starts to make more sense. We’ll show you photos of what we find and give you both options in writing, with no pressure toward the bigger job. If it is not right in the opening, it will not be right in ten years.
When the scope requires a permit under City of Greenacres and Palm Beach County code, we pull it, and we schedule the inspection. Most repair work falls under the permit threshold, but we’ll tell you honestly on the first call or during the inspection whether your job needs one. If it does, the permit is included in your written quote and the inspection is scheduled before the job is considered complete.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Greenacres and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.