Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterPella Custom Windows & Doors in Greenacres: What to Know First
Pella custom windows and doors in Greenacres run from $1,800 for a single custom-shape replacement up to $9,500 or more for a full custom architectural door system, with most mid-range jobs landing between $3,000 and $6,000. We’re an independent Pella service provider, not a Pella dealer, which means we quote actual numbers and stand behind the work with our own Done Right Promise. If you own a Pella product and it needs custom work, repair, or replacement, call (754) 339-0784 and a live person will answer.
This page is for Greenacres homeowners who already own Pella windows or doors and want straight answers about repair, replacement, and custom work. Whether it’s a fogged insulated unit in a Pella Architect Series casement or a custom arch-top that was never right from day one, we’ve seen it, fixed it, and know what corners the last guy cut.
How Pella Products Fail - and How We Fix Them
- Pella Architect Series wood windows: failed glazing beads and sash rot at the bottom corners. In Greenacres, the humidity works its way into the sill track and sits there. We see Architect Series double-hungs where the glazing bead has swollen, cracked, or been re-caulked so many times the seal is gone. The fix is a full sash rebuild with new OEM-profile bead and a properly bedded insulated unit, not another bead of silicone over the rot. On the custom window side, this matters more because Arch Series shapes like arch tops and trapezoids can’t just be swapped with a stock sash, the geometry has to be measured twice before we order anything.
- Pella 250 Series vinyl: failed corner welds on custom shapes. Vinyl windows are welded at the corners, and on custom shapes like triangles, circles, and oversized trapezoids, those welds take more thermal stress than a rectangular window ever will. The vinyl expands and contracts at a different rate than the glass, and in a South Florida summer that differential is constant. We see 250 Series shape windows with micro-cracks at the weld that eventually become air leaks and water leaks. We re-weld, reinforce, or replace the sash depending on how far the failure has run.
- Pella Impervia fiberglass: stress fractures around the glass on oversized panels. Impervia is a strong line, but oversized glass panels in a fixed frame put constant pressure on the fiberglass. We’ve pulled Impervia units out of Greenacres homes where the frame had hairline fractures radiating from the corners of the glass pocket, not from impact but from years of thermal cycling. This is one of those things you won’t find on Pella’s website. Fiberglass is rigid, and when it’s asked to flex, it eventually cracks. We reinforce the opening, re-bed the glass, and when needed, rebuild the frame section.
- Pella Designer Series: failed between-the-glass blinds and shade mechanisms. The Designer Series is popular in Greenacres for the built-in blinds, but those blinds live in a sealed airspace between two panes of glass. When the operator mechanism strips or a blind cord breaks, you can’t just pop the blind out and replace it. The entire insulated glass unit has to come out. We disassemble, replace the mechanism with the correct OEM part, and reset the unit with a fresh seal. On custom sizes, that IGU is a special order, so we measure it three ways before sending the order in.
- Custom shaped Pella windows: leaking at the mull joints where the shape meets the rectangle. When a custom arch or radius top is mulled to a rectangular window below it, that joint is a weak point. We’ve been called to Greenacres homes where the leak wasn’t the window at all, it was the mull joint that was never properly flashed. On a Pella job, the fix is to pull the shape unit, re-flash the rough opening, reset both units, and re-mull with the correct Pella mull bar and sealant. Done wrong, it leaks again. Done right, it stops and stays stopped.
Our Pella Custom Windows & Doors Process
- 1
Call and talk to a person. You call (754) 339-0784. A live person answers. No voicemail tree, no callback form. You tell us what’s wrong and we tell you honestly whether it sounds repairable or replaceable.
- 2
On-site measurement and diagnosis. A background-checked, uniformed technician comes out and measures every opening twice. We don’t trust a single measurement on a custom shape. We check the rough opening, the reveal, the reveal on the other side, and the plumb. If the frame is racked, we tell you before we order anything.
- 3
Written line-item quote with both options. We put OEM Pella parts and quality aftermarket parts on paper side by side, with prices. You see exactly what you’re buying. We don’t hide the markup in a “miscellaneous materials” line. A square deal, in writing.
- 4
Parts order and prep. For custom shapes or oversized glass, we order the unit and schedule the install only after it arrives. For common sizes, we stock what we can. Either way, you know the timeline before we leave.
- 5
Install the right way. We set the frame, shim it true, seal it, flash it, and set the glass. The founding rule still applies: if the pane is not true, the job is not done. We don’t rush a custom install and we don’t leave a mess behind.
- 6
Warranty registration and the Done Right Promise. Before the truck leaves your driveway, both manufacturer warranty layers are registered in writing with the durations stated. Our workmanship is guaranteed for 90 days with no paperwork fights. If it’s not right, we make it right.
What Pella Custom Windows & Doors Costs in Greenacres
| Job Type | Typical Range in Greenacres |
|---|---|
| Custom shape window repair (arch, circle, trapezoid) | $1,800 - $4,200 |
| Insulated glass unit replacement (custom size) | $600 - $1,800 per unit |
| Custom door system replacement (single entry) | $2,500 - $6,000 |
| Full custom window package (3-5 windows) | $5,500 - $18,000 |
| Mull joint re-flash and reset | $500 - $1,200 per joint |
Three things move the price: custom geometry (every non-rectangular cut costs more to fabricate), glass type (impact-rated laminated glass is the single largest cost add in South Florida), and access (second-story windows or tight clearances add labor). What doesn’t move the price once we’ve quoted it: nothing. Our quotes are fixed. Call (754) 339-0784 for a free estimate and we’ll put real numbers on paper for your specific Pella job.
Why Greenacres Homeowners Call TruePane Windows & Doors for Pella Work
We’ve spent years serving Greenacres and the surrounding communities, and Dale Kessler, our owner, grew up off Jog Road, so this isn’t a territory assignment for us, it’s home. We know what a Greenacres summer does to a window seal, and why a Pella wood window near a canal will rot faster than the same window two miles inland. Our technicians are background-checked and uniformed, trained to treat your house like their own mother’s. And we install more than a dozen manufacturer lines, including Andersen, PGT, and CGI, so when a Pella part is backordered or a custom unit has a 6-week lead time, we can show you options from other names that will actually work. A live person answers the phone 24/7. We stand behind it.
FAQs
We can’t file a claim on your behalf as an independent service provider, but we can help you understand exactly what your Pella warranty covers, document the failure for your claim, and do the repair or replacement work once the claim is approved. On many Pella lines, the glass unit carries a different warranty than the frame or hardware, so what sounds like a covered claim often isn’t. We’ll walk you through it in plain English before any money changes hands.
Both, and we show you both options on paper with prices. OEM Pella parts ensure exact fit and preserve any remaining warranty coverage. Quality aftermarket parts often cost 30-50% less and, for things like insulated glass units and weatherstripping, perform just as well. We tell you which is which and let you decide, no pressuring.
In most cases, only the insulated glass unit needs replacing, not the entire window or door. The frame, sash, and hardware stay in place. We measure the existing unit, order the correct replacement with the same glass package, and swap it in. The repair takes a few hours per unit, not a full day. Call (754) 339-0784 and we’ll tell you over the phone whether it’s likely a glass-only fix.
Most custom shape windows take 3 to 6 weeks from order to install because the unit is fabricated to your exact measurements at a specialty glass facility. Common rectangular replacement sashes are often ready in 1 to 2 weeks. We don’t promise same-week availability on custom work because that’s not how custom fabrication works, and we won’t tell you otherwise just to get the job. What we will do is give you a real timeline up front and stick to it.
No. The price we quote is the price you pay, unless you ask us to do additional work outside the original scope. If we open a wall and find rotted framing that couldn’t be seen from the outside, we’ll stop, show you what we found, and give you a separate written quote for the extra work before we touch it. No surprise line items on the bill. That’s a square deal, and it’s been our standard since the day Dale Kessler founded this company.
Written by Dale Kessler, Owner, TruePane Windows & Doors, serving Greenacres and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.