Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Simonton Window Installation in Greenacres: What to Know First
Simonton window installation in Greenacres typically runs $450-$1,150 per opening for a direct replacement, depending on the series, the condition of the rough opening, and whether impact glass is required. Most single-window jobs are completed in one visit, and we quote the work on paper before any tool comes off the truck. As an independent Simonton service provider, we install and replace the full Simonton catalog - from Reflections 5050 to StormBreaker Plus - and we register both warranty layers in writing before we leave your driveway.
This page is for the Greenacres homeowner who already knows Simonton and wants the install done right the first time. If you have a fogged seal, a sash that binds, or a builder-grade Simonton that never sat square, call (754) 339-0784 and we will talk you through what we are seeing before we ever schedule a visit.
How Simonton Products Fail - and How We Fix Them
- Reflections 5050 and 5500 - sash sag and corner seal separation. These mid-range vinyl lines use welded corners that hold up well, but the sash balances lose tension after years of Florida humidity cycling. The symptom is a window that slides down on its own or takes two hands to lift. The real cause is usually a worn block-and-tackle balance, not the frame. We replace the balance and re-shim the sash so it rides true, instead of forcing a warped frame back into place.
- StormBreaker Plus - interlock failure at the meeting rail. Impact-rated Simonton units carry a heavier sash, and the interlock at the center meeting rail is the first point to wear. When the interlock no longer seats fully, the window loses its design pressure rating - which matters in Greenacres, where wind-driven rain against a west-facing wall is a regular summer event. We reset or replace the interlock hardware and re-test the seal with a water check before we call it done.
- Professionals Series - nailing flange leaks from original construction. We see this on Greenacres homes built in the mid-2000s boom, where Simonton Professionals units were slapped into rough openings with insufficient flashing. The window itself is fine; the perimeter seal is not. We pull the trim, inspect the rough opening, re-flash with proper tape and sealant, and reset the unit. It is a full-day job that saves you from replacing a perfectly good window.
- Daylight Max and Madeira - roller and track wear on sliding units. Horizontal sliders take grit from Greenacres landscaping and road dust into the track. The factory rollers are nylon and wear flat within a decade. The fix is replacing rollers with a quality aftermarket set rated for coastal humidity, then dressing the track so it does not eat the new ones in two years.
- Generations and Prism - glass seal fogging between panes. Once the desiccant inside the spacer bar is saturated, the insulated glass unit fogs permanently - no amount of cleaning fixes it. Simonton’s warranty covers the IGU on many lines for 20 years, but the labor to swap the glass is a separate matter. We handle the glass warranty paperwork and the install so you are not stuck coordinating with two companies.
Our Simonton Window Installation Process
A Simonton job starts with a phone call to (754) 339-0784, not a web form. One of our techs answers - a person, not a queue - and asks what the window is doing, what series it is, and when it started. Then we schedule a visit.
- 1
On-site inspection and measurements. We measure every opening twice, check the square of the rough opening, and read the existing install the way a frame carpenter reads a foundation. Dale Kessler grew up off Jog Road and has been setting frames in Palm Beach County for going on two decades - he knows what a Greenacres wall does after twenty humid summers.
- 2
Parts decision on paper. We show you the OEM Simonton part and a quality aftermarket alternative side by side, with prices, and explain the trade-off in plain terms. No hidden line items, no “we will figure it out later.” You decide before we order anything.
- 3
The install. We pull the old unit, inspect the rough opening for rot or water damage, repair what needs repairing, and set the new Simonton window square and plumb. Shims are placed with intent, not wedged in until it looks level.
- 4
Seal and flash. Perimeter sealing is done with materials rated for South Florida humidity and wind-driven rain. We do not caulk over gaps; we close them first.
- 5
Test and walk-through. We operate the window in front of you, check the weep holes, run a water test on impact units, and clean up before we hand you the paperwork.
- 6
Warranty registration. Both Simonton warranty layers - glass and frame - are registered in writing, with durations stated, before the truck leaves the driveway. That is The Keystone Standard, and we do it on every job.
What Simonton Window Installation Costs in Greenacres
Here is what we see in Greenacres for Simonton work, in plain numbers:
- Balance or roller replacement on a 5050 or Daylight Max: $140-$280 per window, including the part.
- Full sash replacement on a Reflections 5500: $250-$520 per sash, depending on glass package.
- Complete window unit replacement (mid-range Simonton vinyl, non-impact): $620-$950 per opening installed.
- Complete impact-rated unit (StormBreaker Plus or equivalent): $850-$1,450 per opening installed, depending on size and design pressure.
- IGU glass swap with warranty coordination: $180-$390 per window, not including glass cost if warranty does not cover it.
What moves the price: the condition of the rough opening, whether the unit is impact-rated, and accessibility on a second story. We do not change the number after we start. Call (754) 339-0784 for a free estimate - we come out, measure, and put the price in writing.
Why Greenacres Homeowners Call TruePane Windows & Doors for Simonton Work
We have been serving Greenacres and the surrounding communities since 2008, through a heritage of craft that started when Dale Kessler was holding shims for his father at age twelve. TruePane is not a franchise playbook - we hire local, train apprentices into journeymen, and plan to be in town in thirty years. The Done Right Promise means if it is not right, we make it right - no paperwork, no arguing. A live person answers the phone 24 hours a day, 7 days a week.
And if a Simonton unit is not the right long-term answer for your opening, we install and service more than a dozen other manufacturer lines, including Andersen, Pella, and PGT. We will tell you honestly if a different line serves you better - because the right window matters more than the brand loyalty.
FAQs
Simonton’s warranty covers the glass and frame per the terms of your specific series - often 20 years on glass and lifetime on vinyl for original homeowners. What it does not cover is the labor to remove, reset, or replace the unit, and it does not cover improper installation. That is why we register both warranty layers in writing and install to manufacturer spec. Call (754) 339-0784 and we will walk you through what your warranty actually says, in plain English.
Most single-window Simonton replacements are completed in one visit, usually within a week of your free estimate. If the rough opening needs work - flashing replacement, rot repair, re-squaring - the job takes longer, and we tell you that before we start. Call (754) 339-0784 to schedule an estimate, and we will give you a straight answer on timing.
Both, and the choice is always yours after we show you the numbers. OEM Simonton parts preserve the exact factory spec and warranty alignment. Quality aftermarket parts - rollers, balances, hardware - often outlast the originals in coastal humidity, and they cost less. We explain the trade-off on paper before ordering anything. Call (754) 339-0784 if you want to talk through your specific window.
If the frame is square, dry, and structurally sound, repair is usually the right call - it costs less and keeps your original glass package. If the frame is warped, the rough opening has water damage, or you are upgrading to impact-rated glass for Greenacres storm season, full replacement is the smarter long-term investment. Dale Kessler’s rule: “If it is not right in the opening, it will not be right in ten years.” Call (754) 339-0784 for an honest assessment - we will not sell you a replacement if a repair serves you better.
Yes - where Greenacres or Palm Beach County requires a permit for window replacement, we pull it, schedule the inspection, and make sure the job passes the first time. Impact-rated work especially needs to meet current Florida Building Code, and our installs are known for passing inspection on the first visit. Call (754) 339-0784 and we will confirm what your specific project requires.
If your Simonton windows need a second look, a reset, or a full replacement in Greenacres, call (754) 339-0784 for a free estimate. We will measure, quote on paper, and stand behind the work in writing - done right, every time.
Written by Dale Kessler, Owner, TruePane Windows & Doors, serving Greenacres and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After